DCT DPS6 Dual Clutch Transmission Remover Installer Tool Set Kit Compatible with Engine Repair Tool

Special designed to disassembly dry transmission and align the twin-clutchto change the oil sealInstall the special tool and compress the input shaft.Disassembly lock instructions:Step 1:Disassemble the double clutch fixing snap ring, install and remove the three claws and pull out the double clutch.Step 2:Put the double clutch into the base of the tool, insert the cylinder into the base with the inside facing up, and place the two tool wrenches in the appropriate position.Tap the two wrenches to pinch them (the two wrenches are pinched when locked, you can use a hard object to pat them loose).Step 3:Take out the dual-clutch locking tool to align the base, screw in the screw and knead the two wrenches, unscrew the bearing nut on the screw, and release the wrench into the three-side clamping slot when it is in position Locking tool .Step 4:Install the locking tool and align it with the appropriate slot to it into the base cylinder. Screw in the screw, pinch the two wrenches, and unscrew the bearing nut. When you hear a few crackling sounds, remove the locking tool and see if the internal card slot enters the round hole .If not, continue to step 4. At this point, the dual clutch tool has been locked and can be installed at any time.Instructions Compatible With installing an unlock lock:Step 1:Insert the locked double clutch, put it into the mounting sleeve, install the extension feet on three sides to fix the proper holes, and fix the extension feet. Unscrew the screw and observe whether it is in place. When in place, remove the tool and install the retaining ring.Step 2:Remove the motor on both sides, use the hexagonal tool to insert the motor teeth, and rotate it counterclockwise to the end (there is a popping sound when rotating, and the double clutch slightly pops up). Turn the other side counterclockwise again. Finally install the motor. At this point, the dual clutch has been unlocked and can be loaded.==========Material : Steelcolor : red/blue in randomApplication : Household Tool Setweight : 9.5kgDIY Supplies : MetalworkingKeywords 1 : auto Repair ToolsKeywords 2 : Car Repair ToolsKeywords 3 : Car ToolsKeywords 4 : Auto Hand Tool Setis customized : yesDear customer! Welcome to our store, thank you for your visit! May our products bring you joy and convenience, enjoy exploring our selection of products, and wish you a happy shopping!

• Drawer storage: the missing parts can be seen at a glance, and no small accessories are lost.
• Quick-release commutation: switch forward and backward in 3 seconds, and double the disassembly efficiency.
• It can flexibly adapt to the space angle and improve the convenience of operation.
• The special fitting for special parts can perfectly fit the parts and avoid slipping during disassembly.
• Ergonomic handle: the radian of the handle fits the force angle of the palm, which is suitable for long-term automobile maintenance.